Product information
Technical data
Technical drawings
Downloads
Accessories

Pressure transmitter 540
The microprocessor-controlled, programmable pressure transmitters of Type 540 feature a robust industrial design. Through a configuration menu with up to two programmable switching points, the parameters can be easily adjusted using two user-friendly function buttons. All devices have a diagnostic function. The large 4-digit LED display ensures good readability. The 540 pressure transmitters are based on the thick-film technology developed by Huba Control, in which the pressure measuring cell is welded to the pressure receiver without seals.
- Compact and robust design
- High overpressure safety
- Easily readable display
- Simple operation
- Diagnostic options
- Available with analog signal
- With up to two programmable switching outputs

Pressure transmitter 540
Product feature
Pressure measuring range
0 ... 600 bar (Relative)
Response time
<5 ms
Load change
<100 Hz
Display
7-segment LED, 4-digit for displaying the pressure value, parameter value.; LEDs to indicate the switching status.; LEDs to indicate the selected pressure unit.
Diagnostic function
Can be operated manually via keypad: checking the sensor circuits and the stainless steel cell. Version with diagnostic input available.; Digital query via PLC (feedback with 50 % FS signal 12 mA or 5 V)
Sensor weight
<120 g
Field of application
Media
Process medium; Gas
Medium temperature
-20 ... 80 °C
Permissible overload
3 x FS (max. 1500 bar)
Bursting pressure
6 x FS (max. 2500 bar)
Ambient condition
Ambient temperature
-20 ... 80 °C
Storage temperature
-40 ... 80 °C
Material
Housing
Polyarylamide 50 % GF Black
Measuring element with media contact
Stainless steel
Pressure connection with media contact
Stainless steel 1.4404 (AISI 316L)
Electrical data
Supply voltage
17 ... 33 VDC
Burden
>10 kOhm
Burden
<500 Ohm
Current consumption
<50 mA
Inverse-polarity protection
Short-circuit and reverse polarity protected. Each connection against each other with max. supply voltage.
Protection class
3
Programming
General
All settings can be made without pressure or during operation; there is a default setting ex works.
Analogue output setting range
75 ... 125 % FS
Digital output setting range
8 ... 100 % FS (increasing pressure); 5 ... 97 % FS (falling pressure)
Switch-on delay setting range
0 ... 50 s (for normally closed or normally open contact)
Setting range switch-off delay
0 ... 50 s (for normally closed or normally open contact)
Installation guide
Installation orientation
any (Recommendation: Electrical connection downwards)
Approval
EMC compatibility
CE-compliant in accordance with EN 61326-2-3 and EN 50121-3-2
Shock
100 g, 11 ms, half-sine curve, all 6 directions, free fall from 1 m onto concrete (6x) (according to IEC 68-2-27)
Vibration
20 g, 15 ... 2000 Hz, 15 ... 25 Hz with amplitude ± 15 mm, 1 octave / minute in all 3 directions, 50 continuous loads (according to IEC 68-2-6)
Drinking water authorisation
NSF/ANSI 61/372 according to MH60087; WRAS

Pressure transmitter 540



Pressure transmitter 540
Download the product-specific technical documents here in the language of your choice download page
.
or open it in a new window . You can find all product and business-relevant documents on our central EN-GB

Data Sheet 540
Data Sheet
PDF
FR
EN-GB
DE

Operating Instruction 540 548
Operating Instruction
PDF
EN-GB

Drinking water approval WRAS
Certificate
PDF
EN-US

Drinking water approval UL
Certificate
PDF

Pressure transmitter 540
Order number
Accessories
104551
Calibration certificate
105073
Heat sink
with external thread G ½ - internal thread G ¼
105074
Heat sink
with external thread G ¼ front sealing - internal thread G ¼
114564
Straight cable socket
for M12x1 connector with cable; (with temperature output); 200 cm; 5-pole
118099
Straight cable socket
for M12x1 connector with cable; (with UL approval); 200 cm; 5-pole
118716
Mounting bracket
With screw