Product information
Technical data
Downloads
Accessories
Pressure transmitter 511
The compact pressure transmitters of Type 511 meet the highest demands in terms of robustness, accuracy, temperature stability, and EMC properties. They are therefore suitable for use in a wide range of industrial applications.
- Compact and robust design for maximum operational safety
- No media leakage when exceeding burst pressure
- Minimal temperature influences on accuracy
- Excellent EMC properties
- Time-saving, fast customer-side cable assembly with quick cable screw connection
Pressure transmitter 511
Product feature
Pressure measuring range
-1 ... 600 bar
Media stop system
Media stop system to prevent media from escaping if the bursting pressure range is exceeded. (> 40 bar nominal pressure)
Response time
<2 ms (typ. 1 ms)
Load change
<100 Hz
Sensor weight
85; 95 g
Field of application
Media
Process medium; Gas
Permissible overload
2,5 x FS (max. 900 bar); 3 x FS
Bursting pressure
2,5 x FS (max. 900 bar); 3 x FS
Ambient condition
Ambient temperature
<125 °C
Material
Housing
Stainless steel 1.4305 (AISI 303)
Measuring element with media contact
Ceramic Al2O3 (96 %)
Pressure connection with media contact
Stainless steel 1.4305 (AISI 303)
Media stop system with media contact
PPS
Sealing material with media contact
FPM; EPDM; NBR; FPM spez.
Electrical data
Current consumption
<20 mA
Inverse-polarity protection
Short-circuit and reverse polarity protected. Each connection against each other with max. supply voltage.
Insulation voltage
500; 1000 VDC
Electrical connection
Cable 1.5 m; Cable quick connector; AMP connector (Junior Power Timer); M12x1 connector plastic thread; M12x1 connector metal thread; Connector DIN EN 175301-803-C (industry standard 9.4 mm)
Installation guide
Installation orientation
any
Approval
EMC compatibility
CE-compliant in accordance with EN 61326-2-3
UL
according to standard 61010-1
Shock according to IEC 60068-2-27
100 g, 11 ms half sine wave, all 6 directions. Free fall from 2 m onto concrete (6x).
Permanent shock according to IEC 60068-2-29
40 g over 6 ms, 1000x all 3 directions.
Vibration according to IEC 60068-2-6
20 g, 2 ... 2000 Hz with amplitude ± 15 mm, 1 octave / minute in all 3 directions, 50 continuous loads.
Pressure transmitter 511
Download the product-specific technical documents here in the language of your choice or open it in a new window . You can find all product and business-relevant documents on our central download page
.
EN-GB
Data Sheet 511
Data Sheet
PDF
Pressure transmitter 511
Order number
Accessories
104244
Socket outlet DIN EN 175301-803-C
with seal; IP 65, when mounted and screwed
104551
Calibration certificate
106975
Angled cable socket
M12x1; 3-pole
108767
AMP socket (Junior Power Timer)
3-pole
110442
Set - AMP JPT socket outlet
2-pole (3-pole with 1 dummy plug)
117312
Socket
for cable quick connector