Product information
Technical data
Applications
Downloads
Accessories
Differential pressure transmitter 402
The differential pressure transmitters of Type 402 are ideal for detecting small airflows in HVAC systems and for measuring low pressures in the environmental and medical sectors. Sensors specifically developed for each pressure range enable physically accurate and long-term stable measurements.
They allow for simple and quick installation, either directly onto a mounting plate or onto a PCB
- Attractive price-performance ratio
- Excellent synergy of membrane technology and ceramic elements
- Special adapter for DIN rail mounting
- Direct PCB mounting with simple snap system
Differential pressure transmitter 402
Product feature
Pressure measuring range
0 ... 50 mbar (Relative and difference)
Response time
<10 ms
Load change
<10 Hz
Sensor weight
28 g
Field of application
Media
Air; Neutral gases
Medium temperature
0 ... 70 °C (Non-freezing media)
Permissible overload on one side
100 mbar
Bursting pressure at room temperature
200 mbar
Bursting pressure at 70°C
150 mbar
Ambient condition
Ambient temperature
0 ... 70 °C
Storage temperature
-30 ... 70 °C
Material
Housing with media contact
Polycarbonate (PC); Polyamide (PA)
Membrane with media contact
Silicone
Measuring element with media contact
Ceramic Al2O3 (96 %)
Electrical data
Output pressure
0,5 ... 4,5 V
Supply voltage
10,2 ... 33 VDC
Permissible load
>15 kOhm (against GND)
Current consumption
<8 mA
Inverse-polarity protection
Mechanically guaranteed
IP protection class
IP 00
Electrical connection
Printed circuit board assembly (Solderable pins on the print side); Printed circuit board assembly (Mounted and soldered on adapter); RAST 2.5 connector
Approval
EMC compatibility
The product is intended exclusively for installation in appliances that fulfil the requirements of the EC directives. CE certification is the responsibility of the customer.
Installation guide
Installation orientation
Pressure connections downwards; Pressure connection P1 top
Assembly
Snap-on mounting on printed circuit board (max. 1.6 mm thickness); Adapter; Screw mounting with bracket
Differential pressure transmitter 402
Differential pressure transmitter 402
Download the product-specific technical documents here in the language of your choice or open it in a new window . You can find all product and business-relevant documents on our central download page
.
EN-GB
Data sheet 402
Data Sheet
PDF
Differential pressure transmitter 402
Order number
Accessories
101817
RAST 2.5 connector
With cable; 110 cm; 3-pole
102976
Fastening screw
for wall thickness 1 - 2 mm; Screw length 6 mm (min. 2 screws required)
104551
Calibration certificate
108222
Mounting bracket
110656
Mounting plate complete for mounting rail TS 35
112213
Fastening screw
for wall thickness 4.1 - 6 mm; Screw length 10 mm (min. 2 screws required)